|
Name |
Hot Air Circulation Drying and Solidification Equipment |
|
Technical parameters |
|
Power supply |
3-phase 380v 50Hz |
|
Operating temp. range |
Room temperature～200℃ |
|
Heating-up time of unload oven |
40～100℃/h |
|
Temp. rise of external surface |
≤Room temperature+25℃ |
|
Range of temperature fluctuation |
≤±1℃ |
|
Temperature uniformity |
≤±2.5%(referring to the maximum operating temperature) |
|
Heating power |
acc. to the volume of oven |
|
Blasting power |
0.75kw/ set, quantity undetermined |
|
Exhaust power |
0.75kw×1 unit |
|
Usable size |
|
Autoclave |
1600×1800×2000mm（W×H×D） |
|
2000×2000×3000mm（W×H×D） |
|
2000×2000×3500mm（W×H×D） |
|
We are able to manufacture autoclave in non-standard size as customer’s requirement. |
|
Trolley |
Matching with autoclave |
|
Autoclave structure |
|
Autoclave |
Structure of integral frame, large autoclave will be manufactured on site. |
|
Door |
There is manual side-by-side door at the front of autoclave. |
|
Shell |
Cold-rolled steel plates Q235 are sprayed with acrylic self-drying paint after rust-proofing treatment. |
|
Inner wall |
Cold-rolled steel plates Q235 are sprayed with organosilicon coating W61 for temp. resistance after rust-proofing treatment. |
|
Shell skeleton |
Channels and angle irons Q235 are rust-proof. |
|
Inner wall skeleton |
Angle irons Q235 are sprayed with organosilicon coating W61 for temp. resistance after rust-proofing treatment. |
|
Insulation material |
High-grade aluminum silicate cotton, rock wool and other insulation material |
|
Blasting system |
|
Circulation mode |
Air current is creating by blaster and heating by heater, then blow into working room from air duct on left and right. Finally, suck into the blaster so as to form a hot air circulation through a circle. In order to keep the temperature uniformity, circulating motor with large air delivery and high pressure will be adopted. |
|
Blast motor |
Temp. resistant long-axis motor which is special for solidification |
|
Inlet valve |
Manual valve for adjusting air input |
|
Exhaust device |
Intermittent auto-exhaust device |
|
Heating system |
|
Heating room position |
Under the working room |
|
Heater |
Y connection, 220V, 50Hz, electric heating pipes |
|
Control system |
|
Control |
cabinet Conjoined cabinet |
|
Temp. control |
The intelligent temperature controller sends out triggered signal, and the heating power is adjusted via the silicon controlled parts (SSR) to ensure the execution and tracking of the working temperature—time curve; AI series instruments from Xiamen Yuguang are used as the intelligent temperature controller with the PID self-setting function and optional communication port; the silicon controlled parts (SSR) are from Shimaden Beijing. |
|
Over-temp. alarm |
When the temperature in the oven exceeds the set alarm value, the contactor of the main heating circuit will automatically cut off the heating power supply and give an audio-visual alarm. |
|
Control of blast system |
There are buttons on the control panel. To turn on and off the blast system by a contactor. |
|
Configuration of protective system and auxiliary function |
1.Illumination system
2.The electric components and lines are protected in accordance with the national standards for power industry.
3.Interlock device for motor and heating: The blower is started before heating in order to protect the heater from damage. |
|
Spare part description of solidification oven |
|
Inlet valve |
The air input could be adjusted manually according to the baking material. |
|
Exhaust valve |
The air displacement is adjusted manually according to the amount of volatiles of matters to be baked for optimum performance |
|
Sight glass |
There are 2 sight glasses (diameter Φ160) on each door so as to observe the situation in the autoclave. |
|
Illumination |
There 2 lights (36v, 100w) in the autoclave |
|
Color |
Recommendation:
1. autoclave---gray, door---red
2. or all are in apple green
3. defined at customers’ option |
